|
|
|
12'
X 20' X 8' |
 |
|
12'
X 20' X 11' |
 |
|
12'
X 24' X 8' |
|
.jpg)
|
|
12'
X 12' X 8' |
|
|
|
6'
X 12' X 8' |
|
|
|
8'
X 8' X 8' |
|
|
|
5'
X 10' X 8' |
|
|
|
Utility Building
14' x 30' x 12' Utility
Standard
Specifications
| Nominal Size |
14' Wide x 30’ Long x 12' High |
| Arches |
Seven (7 ) on 60" spacing
1-5/8" diameter frame members |
| Standard End Door Size |
12' wide x 10' height at edge
double zipper door each end |
| Available Colors |
Outer Colors: Grey / Green / Tan
All Interiors: White Only |
| Shipping Weight |
460 Lbs. in Five (5) boxes shipped via motor
freight |
| Main Cover |
UV protected 24 mil, fabric backed poly. 10oz.
weight |
| Fire Retardant Standard |
Main Cover & Doors meet CPAI -84 Section 5 |
| Anchors |
Fourteen(14) Anchors with U-Bolts &
36"Drive Rod Std. |
| Stock Number |
14x30x12(*)HSK
*
- Color Prefix: Green, Grey etc. |
VT
instant Garages
Typical uses include:
- Vehicle protection and storage
- Equipment / material storage
- Workshop areas.
The round style unit provides extra space along the
sides of the enclosure, with maximum height near the
center ridge. The pre-drilled frame is easily
assembled with minimal handtools. Unlike other
products, no drilling or field cutting is required.
All frame components are made from heavy duty
galvanized steel. Main cover and doors are made from
long life UV Resistant, Fire Retardant Polyethylene
with woven backing.
All fabric components feature heat-welded seam
construction. Unit features double zipper door on BOTH
ENDS to allow drive-through capability, and good
ventilation. Each door contains a pocket for a rigid
pole at the base. The long lasting cover is designed
with full flap provides for run-off of rain or melting
snow and diverts water from entering through the
perimeter of the cover. Each unit comes completely
equipped with a set of earth anchors with 36"
stainless steel tethers and a 36” drive rod to
secure the unit at each corner and each frame arch.
Exclusive
Utility Building Features
- Heavy Duty Galvanized Finish on All
Steel Frame
Components for Maximum Strength & Long
Life
- Easy Bolt Together Design - all
Pre-drilled & Cut
- Wind Brace Support on Both Sides
- Two(2) Double Zipper Doors with Bottom
Pockets
- One (1) complete Roll-up Door Kit
- Protective Plastic Tube End Caps - All
Open Ends
- Standard Thread Plated Hardware Kit with
Retaining
Nuts & Protective SS Washers
- Quick Assembly Wrench included
- Heavy Duty Poly Rope for Main Cover Tie
Down
- Heavy Duty Grommets on Cover & Doors
- Five Box Shipment - easily
unloaded and transported (shown
right)
- Assembles in 4 hrs
|
|
|
